transport cart
BRACE helped transfer and update skid steer loader attachments from an old drawing package to SolidWorks. In addition, ridge/hole connections have been added, construction has been simplified where possible and purchase parts have been updated. The piping has also been added with routing and the strength and stiffness have been checked with FEM.
In addition, the documentation regarding the machine guidelines, risk analysis and user manual has also been added where necessary.
Feed/snow slider Mechanical and Hydraulic
BRACE helped transfer and update skid steer loader attachments from an old drawing package to SolidWorks.
In addition, ridge/hole connections have been added, construction has been simplified where possible and purchase parts have been updated. The piping has also been added with routing and the strength and stiffness have been checked with FEM.
In addition, the documentation regarding the machine guidelines, risk analysis and user manual has also been added where necessary.
Prototype White Goods Clamp
In addition to the existing attachments, the demand has also arisen for a clamp that can stack 1 and 2 refrigerators at the same time for processing old white goods.
The focus was on a design that is as basic as possible and that the refrigerators can be placed as close to each other as possible.
Knik-schrankloader SH300
BRACE helped transfer and update SHERPA's largest skid steer loader from an old drawing package to SolidWorks.
In addition, ridge/hole connections have been added, construction has been simplified where possible and purchase parts have been updated.
Due to new legislation, a different engine had to be used. This resulted in many changes that were implemented.